BSC Logo Format Variations

There are four layout options available for the Burdekin Shire Council Logo (see examples below):

• Landscape Double Line (preferred layout)
• Landscape Single Line
• Stacked Double Line
• Stacked Single Line

Logo Size and Space

In order to maintain the impact and integrity of the logo a minimum size and clear space around the logo must be followed.

Clear Space There must be an “n” width of clear space at all times around the logo, no matter what size the logo.  The “n” value is defined from the letter “n” in ‘Burdekin’.
Minimum Size - Landscape Versions For landscape versions of the logo a minimum size of 8mm high must be maintained.
Minimum Size - Stacked Versions For stacked versions of the logo a minimum size of 15mm high must be maintained.

Logo Formatting

It is important that the logo is correctly formatted whenever it is used.  The image below shows examples of a correctly formatted logo and several examples of incorrectly formatted logos.

What NOT to do

Conjunctional Applications 

When having the Burdekin Shire Council logo or Coat of Arms displayed in conjunction with any other organisations logos the following guidelines should be followed. 

Format Used Where possible always try and match the format of all logos.  This may not always be possible so it is important that the Council logo visually matches the conjunctional logo/s.  The logos should always align at the bottom.
Minimum Size Always adhere to the minimum sizes specified for all logos being used.     Ensure that all logos being used are visually matched and balanced.
Clear Space A clear space of 2x ‘n' should be left between each logo, the dividing line will be centred in this space.    The value of “n” is derived from the letter “n” in ‘Burdekin’ as previously mentioned.
Dividing Line The dividing line is always centred in the clear space between the logos.    The line should always be 1pt in thickness, should always be black in colour and should match the height of our logo.

Coat of Arms (Crest) Logo

The Burdekin Shire Council Coat of Arms logo is available for use, however use has been restrictred to highlight it's significance to the organisation.  Use of the Coat of Arms is limited to the following applications:

• Civic occasions (specifically involving the Mayor and/or Councillors)
• Ceremonical purposes (citizenship, naturalisation, plaques for openings etc.)
• Documents signed under seal
• Any other occasion that holds specific cultural or historical value to the Council

Should you require the use of the Coat of Arms logo permission needs to be requested in writing and approved by the Director of Corporate and Community Services.  You can do this by using the Contact Us link under the Contact Council's Customer Service Centre section on this page, further information can also be obtained from Customer Service regarding logo use.